11 Features of hydraulic warehouse elevator

Hydraulic warehouse elevator is ideal solution for material transfer of warehouse and factories, here are the 11 characteristics to install a hydraulic warehouse elevator.

MORN vertical warehouse elevator is widely used to lift goods or pallets between different floors of the building or warehouse.

It provides fast, efficient, convenient and safe access to mezzanines, basement, and any levels in multilevel building storage both indoors and outdoors.

Load capacity, lifting height, platform size and power supply could be customized based on request.

The characteristics of the warehouse elevator are as follows:

1. lead rail type hydraulic lifting platform, with good leveling effect and convenient for loading, using hydraulic cylinders, special chains and wire ropes for multiple protection, mounting rails on both sides to increase stability and high lifting height, using side-mounted cylinders or double-test cylinders, running smoothly , Low noise, convenient maintenance and long service life;
2. The guide rail hydraulic lifting platform can be manually lowered when power is cut off, which is safe, convenient, fast and practical;
3. The depth of the pit is generally 15cm-30cm, and the height of the top layer is not limited. It can be customized according to the on-site environment; for occasions where the requirements cannot be reached, such as difficult-to-solve narrow spaces, an efficient delivery platform can be tailored. It is possible to directly use slope treatment without pits, which greatly facilitates the installation and use of space and occasions.
4. It is suitable for 2-3 storey steel structure or concrete workshop, and can be used inside and outside;
5. The pumping station adopts joint venture pumping station. If the speed requirement is too high, use joint venture customized pumping station to meet the ideal delivery requirements.
6. Imported parts are used for the oil cylinder and seals to solve the problem of unstable oil pressure and oil leakage of the parts.
7. Explosion-proof electrical appliances can be used according to the requirements of the customer’s site and use environment, the upper and lower doors are interactively interlocked, and each floor and the working table of the lifting platform can be set with operation buttons to achieve multi-point control.
8. Hydraulic safety protection: Set the rated system pressure to protect the main components of the drive cylinder and the motor to prevent accidents.
9. Multiple heavy-duty plate chain locks are used to prevent any one of the lifting platform from falling due to fatigue fracture.
10. Double insurance safety protection to ensure the safety of personal equipment;
11. Good endurance and high tensile strength.