1.The industrial freight elevator’s application fields and its main introductions:
The industrial freight elevator is a new type of hydraulic lifting platform, which is used for the transportation of goods in industrial plants, restaurants, restaurants, and freight stations above the second floor. Since the minimum height is only 150-300mm, it is most practical for workplaces where pits cannot be excavated. There is no need to adjust the point on the upper part, it has the advantages of multiple forms (single, double body,), stable type, good load capacity, low failure rate, etc. It is mainly used for the transportation of goods between various working floors; three-dimensional garages and underground garages are higher than two floors.
MORNLIFT will make every effort to create a high-efficiency delivery platform tailored to you. The hydraulic system of the product is equipped with anti-falling, upper and lower floors. The doors are interlocked with each other, and operation buttons can be set on each floor and the work surface of the lifting platform to realize multi-point control. The product has a strong structure, large carrying capacity, stable lifting, simple and convenient installation, and maintenance. It is an economical and practical low-floor elevator to replace the ideal cargo conveying equipment. According to the installation environment and use requirements of the lifting platform, choose different optional configurations to achieve better results.
● The maximum load is 100 tons, multi-point control is realized, and the upper and lower floors are interactively interlocked to achieve safe use;
● The lifting height is high, and the side-mounted cylinder or the double-test cylinder is adopted, which is stable in operation, no noise, convenient in maintenance, and long in service life;
● Manual lowering and emergency stop button in case of power failure, convenient, fast, and practical;
● The floor door can be penetrated, and the inside and outside of the plant can be connected to each other, which is convenient and saves space;
● Especially suitable for 2-5 storey steel structure workshops, both internal and external;
● The pumping station adopts imported pumping station. If the speed requirement is too high, adopt imported customized pumping stations to meet the ideal delivery requirements.
● Imported parts are used for the oil cylinders and seals to solve the problem of unstable oil pressure and oil leakage of parts.
2. Civil engineering advantages:
● There is no need for a machine room above the hoistway, and the top floor can be installed with a height of 2.5 meters or more.
● The machine room can be located within a 15-meter radius of the hoistway, occupying an area of only 1-2 square meters.
● The hydraulic elevator is not equipped with a counterweight device to improve the utilization rate of the hoistway area.
● The hydraulic elevator load and load directly act on the foundation pit through the oil cylinder, and the hoistway has low strength requirements, and brick structure or brick-concrete structure hoistway is sufficient.
3. Operating cost advantages of industrial freight elevators:
● Low failure rate: Due to the advanced hydraulic system and good control method, the failure rate of elevator operation can be minimized.
● Low power consumption: When the hydraulic elevator goes down, it is driven by the pressure generated by its own weight, which greatly saves energy.