Hello everybody. Welcome to our website. This time we will take all of you with us to understand our star product-mobile scissor lift.
When comes to aerial work platform mobile scissor lift, what is we care about most?
How to use it? And how to safety use it?
Table of Contents
First, let me show you the mobile scissor lift platform’s Features:
It makes many difficult and dangerous tasks easier, such as: indoor and outdoor cleaning (ceilings, curtain walls, glass windows, eaves, awnings, chimneys, etc.), installation and maintenance of billboards, installation and maintenance of street lights and traffic signs Wait. The characteristics of this high-altitude lifting platform are small, flexible, convenient and fast. You can use a lifting platform instead of scaffolding to reach the height you need and solve your problems. At the same time, it can also save your expenses and precious time.
The mobile scissor lift platform is self-moving driven by the reduction motor fixed on gear side of the scissor base structure, powered by batteries. Operator There is speed controlling handle on the tow bar, control the moving speed by rotate the speed controlling handle. Only one people could operate the forward, backward and turning require.
Main structure introduce
1.Guard rail on platform 2、Platform 3、Hydraulic cylinders 4、Scissor struts 5、Ladder 6、Rear axle 7、Speed control handle 8、Outrigger 9、Tow bar
Moving operate instruction
FOR/REV Power switch Battery quantity indicator speed controlling handle
※Before moving the lift, operator must check and confirm the platform is in fully lowered position and all the outriggers are in folded condition.
Steps for moving
1）turn on the power switch, electric quantity indicator on and shows the electricity quantity;
2）choose FOR or REV gears per need
3）Towing the tow bar, rotate the speed controlling handle on tow bar and rotate the tow bar to achieve turning require of lift.
- Forbid lifting up if the lift was put on unsound or out-of-level ground.
- Forbid working on unstable ground, especially when ground is empty or surface relief.
- When doing maintenance, lift must be power off.
- Forbid using platform as ground wire when do welding works.
- Forbid lifting up and working when wind force equal or exceed level-6 on working site.
- Forbid working in thunderstorm weather.
- Forbid moving lift or folding the outriggers when the lift is carrying load or people.
- Forbid operating before the outriggers are extended and the lift is horizontally leveled.
- Forbid sitting, standing or climbing the guarding rails when working on platform.
- Forbid overload than 500KG, (especially the extension deck on platform, forbid overload than 100KG.)
- Forbid hanging anything out of the guard rails.
- Forbid modification on the platform that may cause any influence on its stability.
- Forbid any obstacles or people under platform during operation in case of any danger or risk.
- A trained personal staff is responsible for the operation and maintenance of this platform.
- Charge the batteries timely when the electric quantity indicator shows electricity quantity is in low level. Charge time is about 6-8 hours. Charge AC input should be 220V/50Hz/1 phase. When the platform is out of use for a long time, make sure charge the batteries once a month to protect the batteries and increase its service lift.
- Hydraulic oil should be replaced every half year. Use No.32 # anti-wear hydraulic oil during winter, and No.46 # anti-wear hydraulic oil in summer.
- Platform should be properly stored when it is not in use, covering dust guard and fold up the outriggers. Forbid outdoor storage.
- According to the platform using frequency, carry out inspections and maintenance weekly or annually :
- To check the platform connection pin nuts no loose, and falls off
- To check the hydraulic tubing no rupture, connectors no leakage and loose
- To check the electrical lines no linking, bare
- To check all joints of controlling box no loose, the light is working properly
- To check the electrical, hydraulic valves block, the control handle, the button operating flexible
- To check the switch of the lower and higher limit position no loose, damaged
- To check the lubrication state of strut and cylinder pin, handling into enough oil
- To maintain the glide path often in lubrication, wheel and the slide no dry friction